Air Brake Calipers Are More Safer for Commercial Vehicles
For the safety of our roadways, air brake calipers are the most important component of commercial motor vehicles. The braking system on semi-trucks, large straight trucks, garbage trucks and school buses use compressed air to push the brake shoe lining onto the brake drum creating friction to slow the vehicle. That may not seem very complicated, but it is. The system to slow down a vehicle that may weigh 80,000 pounds fully loaded is not only complicated, it’s critical. air brake calipers have to work effectively every time and they must be adequately maintained.
In 1980 a 40 foot straight truck moving van with a deck over the cab was on route to the customer’s house for unloading outside of Syracuse, New York. The truck had an 11,500 pound tare weight and was carrying 20,000 pounds of furniture (that’s a total weight of 31,500 pounds). Coming off the highway down a steep ramp the driver was frantically pumping the brakes. There was a tee at the bottom of the ramp with the option to only turn right or left. Straight ahead was a 5 foot tall earthen embankment, over that was a 20 foot drop to railroad tracks, and past that was another drop to a river.
Continually picking up speed and only seeing the embankment ahead, the driver cranked the steering wheel for a right-hand turn. The passenger side was completely up off its wheels, the 40 foot truck seemly flew through to the right, laid over on its side smashing onto the road facing the direction of the right turn as the top of the truck slammed into the earthen embankment, lying on its side in the road. Facing the correct direction, but not on its wheels. Going straight would surely have crushed the cab into the embankment, killing the driver and passenger; then would have flipped over and tumbled down to the railroad tracks and possibly tossed and turned all the way to the river below.
Fortunately the driver and passenger were not seriously injured, yet all of the furniture was destroyed. The moral of the story, the air breaks had not been properly maintained.
In 2009 a long awaited mandate from The National Highway Traffic Safety Administration issued new braking standards for commercial trucks, requiring that a tractor-trailer traveling at 60 miles per hour must come to a complete stop in 250 feet. That was a dramatic, but necessary, change from the previous standard of 355 feet, reducing the required stopping distance of a truck by 30%. Had that standard and today’s technologies and regulations on maintenance of air brake calipers been in place in 1980, the furniture truck would likely not have crashed.
Why air brake calipers are Used on Commercial Vehicles
As the name implies, air brake calipers rely on air since there is virtually an unlimited supply in the atmosphere. Therefore, unlike hydraulic brakes that rely on fluid that can be depleted or leak, if properly maintained, air brake caliper systems will never be depleted.
Excluding the engine, air brake caliper assemblies are one of the most complex systems found on any type of commercial vehicle. They are used on tractor-trailers, many larger straight trucks, school buses, fire trucks and even trains. air brake calipers are the best method for safely stopping heavy vehicles, and they are more complex than hydraulic brake systems used on lighter vehicles. Since people interact with vehicles that use air brake calipers, from mechanics to drivers, it is extremely important to understand how they function and their potential limitations.
air brake calipers were initially invented for trains by George Westinghouse in the late 1800’s. When proved to be successful in railroad applications, truck manufacturers began incorporating them. They are safer and more reliable than hydraulic brake systems on commercial vehicles due to:
The air supply being unlimited, insuring the active supply of air it relies on from being depleted
Compressed air is stored in tanks, yet if the compressor fails, the brakes can still bring the vehicle to a stop. This happens because there is enough air in the system that if the compressor is dislodged from side of the motor or the whole system shuts down, the brakes can still stop the vehicle
If there is a significant air leak in the system, there is a fail-safe spring brake which will activate and bring the vehicle to a stop. That's one reason why it is important to properly maintain the system
With a hydraulic brake system, if the fluid is depleted the brakes will not operate likely causing catastrophic danger to life and property.
Leave words, your message replied in 24hours.
Toget Brake
Brand Vision:"to become the China leading supplier of active vehicle safety systems within the commercial vehicle industry."
At Toget, focus on air disc brake calipers technics, exceeding industry standards is a strict requirement.
Brand names, original numbers, vehicle mark and models are only for reference purposes.
